Skip to product information
1 of 2

General Casting Epoxy Resin

General Casting Epoxy Resin

34 reviews

Regular price $58.00 USD
Regular price $58.00 USD Sale price $58.00 USD
Sale Sold out
Shipping calculated at checkout.
Size

FULL SATISFACTION GUARANTEED!!

Crystal Clear Casting Epoxy Resin:
Suitable for most crafts and hobby projects such as Jewelry Casting, River Tables, Canvas Painting and Coins casting purposes etc. It comes in two parts - Resin & Hardener. These two parts MUST be mixed in precise ratio and mixed well to get best results.

Note: Make sure to store the epoxy resin jugs away from direct sunlight at room temperature around 20 to 22 deg C. Keep your project at room temperature so that the project surface is not too cold before pouring epoxy on it.

 

 

Features:

Crystal clear, high gloss and transparent, yellow resistant
Automatic leveling and anti-foaming
Low set-to-touch and cure time
Goes well with pigments of all colors
Non toxic, low odor and low VOC
High hardness after drying
Glossy like mirror

Technical Specifications:
Ratio A to B: 2.7 to 1 (by volume) OR 3 to 1 (by weight)
Pot Life: 30 min
Coverage: 1" thickness for 1 sq ft area needs about 2.5 L of epoxy (Part A + B)
Set to touch time: 12-14 hrs
Curing Time: 20 - 24 hrs (varies based on ambient temp / humidity / thickness)
Surface ready to use time: 72 hrs

Directions:
Step 1: Wear safety glasses and gloves. Measure 2.7 parts of part A and 1 part of part B by volume (OR 3 to 1 by weight). Mix thoroughly.

Step 2: On porous objects such as made out of wood, paint a seal coat of same epoxy mixture of A & B first to seal any pores to prevent air bubbles from forming.

Step 3: Make sure the surface area is horizontal to the ground and leveled. Pour the epoxy on the surface all the way through the area. This epoxy self levels itself so no need to move it around with any tools. Let the epoxy fall over the edges and coat the vertical edges. The liquid epoxy that falls over the edges will form bumps and there is no need to worry about that. These can be sanded off once the epoxy is dried and cured.

Step 4: If multiple flood coats are to be applied, make sure that each flood coat is less than 1/2" thick and maintain a gap of 4 hours between each flood coat.

Step 5: Pop air bubbles using a heat gun or plumber torch.

Step 6: Leave the surface for epoxy curing

Materials

Dimensions

Care information

View full details
Customer Reviews
4.9 Based on 34 Reviews
5 ★
94% 
32
4 ★
3% 
1
3 ★
3% 
1
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
100reviewers would recommend this product Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
SN
11/19/2022
Suhail N.
Canada
I recommend this product

Great quality

Been ordering for 2 years works great

SP
10/12/2022
S P.
Canada Canada
I recommend this product

Great service

Excellent customer service. Plus product was shipped the same day and delivered quick

Trustic General Casting Epoxy Resin ReviewTrustic General Casting Epoxy Resin ReviewTrustic General Casting Epoxy Resin Review
CM
07/23/2022
Carmen M.
Canada Canada

Great price/ great product

This is my 100% go to resin. Love the way it works out so well. I have also used the surface coating and have art epoxy and deep pour waiting for my next project.

DB
05/09/2022
Dajla B.
Canada Canada

DB
04/21/2022
Dajla B.
Canada Canada
I recommend this product

I like their resin. really lest bubbles.